Are you looking for a fresh interior update or is your current door handle simply worn out? Replacing it is often a straightforward solution. In this article, we’ll show you how to install a new door handle in four simple steps. Even if you’re not an experienced DIY enthusiast, you can tackle this project with ease by following our guide.

---

Why replace your door handle?

There are several reasons to consider replacing a door handle. Perhaps the mechanism no longer works smoothly, the old handle looks worn, or you want to refresh your decor. A new handle can be both practical and decorative, perfectly complementing your interior style.

Step 1: Remove the old door handle

• Unscrew the hardware: Start by loosening the screws on the inside of the door. Sometimes these are hidden under a small plate or rosette.
• Slide off any plate or cover: Carefully remove the rosette or backplate from the door, ensuring you don’t scratch the surface.
• Take out the handle and spindle: Once the screws are out, you can pull the handle and the square spindle attached to it out of the door.

Step 2: Prepare for the new handle

• Check the opening: Examine the hole in the door to ensure it’s clean and free of splinters or debris. If needed, gently sand or wipe it out.
• Confirm spindle size: Most door handles use an 8x8 mm spindle, but measure to be certain so you don’t end up with the wrong size.
• Verify screw holes: Some new handles have different mounting points than your old one. Make sure the existing holes align with the new rosettes or backplates.

Step 3: Install the new door handle

• Position the spindle: Insert the supplied spindle through the latch or lock mechanism in the door.
• Attach the handle(s): On both sides of the door, place the handles onto the spindle. Check that they are level.
• Tighten the screws: Secure the included screws carefully. Avoid over-tightening to prevent damage to the door or the threads.

Step 4: Finish up and check

• Attach the cover plate: Gently put the rosette or backplate back on the door. Make sure everything lines up properly.
• Test it out: Press the handle down a few times and release it to ensure it springs back smoothly. If everything feels right and the door closes properly, you’re done.
• Adjust if necessary: If the handle still feels stiff or doesn’t line up, check for proper alignment and make minor adjustments to the screws or spindle placement.

Helpful tips & points to consider

• Choose quality materials: A sturdy door handle will last longer and cause fewer issues.
• Maintain regularly: From time to time, wipe the handle and internal parts with a soft cloth and apply a suitable lubricant to keep everything running smoothly.
• Match your style: Select a door handle that complements your interior decor for a cohesive look.

When to call a professional

In most cases, you can replace your door handle on your own. However, if alterations to the lock are required or if you’re unsure about the correct installation, it can be wise to consult a professional. An expert will know exactly what needs to be done and can recommend the best solution.

Conclusion

Replacing your door handle can be done in just four easy steps. Whether you prefer a modern, rustic, or classic design, a new handle can instantly refresh your space. Make sure you have the correct measurements, work carefully, and double-check your adjustments before you finish up.

Are you searching for a wide range of door handles and matching hardware? Feel free to browse our door handle collection . If you have any questions or need advice, don’t hesitate to get in touch with us. That way, you’re sure to find the perfect handle for your door!

• Share on:
• WhatsApp
• Deel
• X
• Pin it
• Messenger
• Email

---